Powder Coating

JM887 is a 2Mil Green Polyester Film tape with 1.5mils of silicone psa.  Ideal for curing temperatures up to 400F for 20minutes.  Excellent heat & solvent resistance.  Minimal shrinkage after baking and clean removal.  Applications include:  Powder Coating, E-Coating, Anodizing & Plating. 

Adhesive: Silicone
Adhesion: 35oz/in
Carrier: Polyester
Thickness: 3.3mil
Service Temp: Withstands Temperatures up to 400˚F for 20minutes.

JM511 – Polyimide Tape & Disks – 500F 1hour -

JM511 is a 1Mil Polyimide Film tape with 1.5mils of silicone psa.  Ideal for curing temperatures
up to 500F for 1hour.  Excellent dielectric strength, highly conformable and solvent resistant.  Applications
include:  Powder Coating and Wave Soldering. 

Adhesive: Silicone
Adhesion: 
Carrier: Polyimide
Thickness: 3mil
Service Temp: Withstands Temperatures up to 500˚F for 1hour.

JM51 – Fiberglass Cloth Tape & Disks - 500F  continuous -

JM51 is a 5Mil Fiberglass Cloth tape with 2mils of silicone psa.  Ideal for curing temperatures up to 500F continuous.  Excellent abrasion resistance, flame retardant and high tensile strength.   Applications Include:  Powder Coating, Grit Blasting, Ceramic Coating, Plasma & Flame Spray Coating. 

Adhesive: Silicone
Adhesion: 
Carrier: Fiberglass Cloth
Thickness:
Service Temp: Withstands Temperatures up to 500˚F for continuous.

PG21 – High Temp Crepe Tape & Disks – 325F 1hour -

PG21 is a 6Mil Smooth Crepe Paper tape with 1.5mils of synthetic rubber adhesive.  Ideal for curing emperatures up to 325F for 1hour.  Excellent solvent resistance, highly conformable, clean removal and minimal flaking.  Applications include:  Low Temp Powder Coating and Liquid Coating. 

PG505 – Low Temp Crepe Tape & Disks – 200F 1hour -

PG505 is a 5Mil Smooth Crepe Paper tape with 1.5mils of synthetic rubber adhesive.  Ideal for curing
temperatures up to 200F for 1hour.  Excellent solvent resistance.  Applications include: Liquid Coating,
General Purpose Painting and Shipping. 

Adhesive: Rubber Resin
Adhesion: 32oz
Carrier: Crepe Paper
Thickness: 7Mil
Service Temp: up to 200F for 1hour

Solid Silicone Rubber

Solid Silicone Rubber is used to produce press pads, gaskets, cushions and dielectric barriers in a wide variety of applications. Product is supplied in square yard sheet and continuous roll form. Smooth, blemish-free surface. FDA approved. Available in 11 constructions: 30 - , 40 - , 50 - , 60 - , 70 - and 80 durometer, Flame-Retardent, Fiberglass Reinforced, Electrically Conductive - , Thermally Conductive, and Fluorosilicone (fuel/oil resistant). Custom order for pressure sensitive silicone or acrylic adhesive.

Silicone Sponge Rubber

Silicone Sponge Rubber is used to produce gaskets, thermal shields, vibration mounts, seals, press pads and cushions for a variety of applications. Product is supplied in square yard sheet and continuous roll form. Compressible and Flexible. Available in eight constructions: Soft - , Medium - & Firm density - , Flame Retardent - , Fabric Reinforced - , Electrically Conductive, Thermally Conductive - , and Fluorosilicone (Fuel/Oil resistant) - . Custom order pressure-sensitive silicone or acrylic adhesive.