Surface Finishing Tapes

JM887 is a 2Mil Green Polyester Film tape with 1.5mils of silicone psa.  Ideal for curing temperatures up to 400F for 20minutes.  Excellent heat & solvent resistance.  Minimal shrinkage after baking and clean removal.  Applications include:  Powder Coating, E-Coating, Anodizing & Plating. 

JM511 – Kapton/Polyimide Tape & Disks – 500F 1hour -

JM511 is a 1Mil Kapton/Polyimide Film tape with 1.5mils of silicone psa.  Ideal for curing temperatures
up to 500F for 1hour.  Excellent dielectric strength, highly conformable and solvent resistant.  Applications
include:  Powder Coating and Wave Soldering. 

JM51 – Fiberglass Cloth Tape & Disks - 500F  continuous -

JM51 is a 5Mil Fiberglass Cloth tape with 2mils of silicone psa.  Ideal for curing temperatures up to 500F continuous.  Excellent abrasion resistance, flame retardant and high tensile strength.   Applications Include:  Powder Coating, Grit Blasting, Ceramic Coating, Plasma & Flame Spray Coating. 

PG21 – High Temp Crepe Tape & Disks – 325F 1hour -

PG21 is a 6Mil Smooth Crepe Paper tape with 1.5mils of synthetic rubber adhesive.  Ideal for curing emperatures up to 325F for 1hour.  Excellent solvent resistance, highly conformable, clean removal and minimal flaking.  Applications include:  Low Temp Powder Coating and Liquid Coating. 

PG505 – Low Temp Crepe Tape & Disks – 200F 1hour -

PG505 is a 5Mil Smooth Crepe Paper tape with 1.5mils of synthetic rubber adhesive.  Ideal for curing temperatures up to 200F for 1hour.  Excellent solvent resistance.  Applications include: Liquid Coating,
General Purpose Painting and Shipping. 

Adhesive: Rubber Resin
Adhesion: 32oz
Carrier: Crepe Paper
Thickness: 7Mil
Service Temp: up to 200F for 1hour

P32 – Vinyl Plating Tape & Disks - 176 F 1hour -

P32 is a 5Mil PVC Film tape with 1.5mils of rubber adhesive.  P32 provides a very effective vapor and moisture barrier.  Highly conformable and resistant to sun, water, fungus, bacteria, oil, acids, alkalies and corrosive chemicals .  Good abrasion, impact and rupture resistance.  Applications include: Color Coding, Aisle Marking, Harness & pipe wrapping: Duct & Joint Sealing:  Masking for hard chrome plating & anodizing.

Adhesive: Synthetic Rubber Resin
Adhesion: 22oz
Carrier: PVC
Thickness:  6mil
Elongation:  160%
Service Temp:  -20 F to 176 F
Colors Available:  Yellow, White, Black, Clear, Red, Orange, Dark Blue, Light Blue, Gray, Purple, Dark Brown, Light Brown, Dark Green, Light Green

JH1213 is a 3Mil self-wound, dead-soft aluminum foil with an aggressive acrylic adhesive system to create a superior bond.  Conforms well to irregular surfaces.  Excellent chemical and moisture resistance. Ideal for electroplating, powder coating and paint stripping applications.

Adhesive: Acrylic
Adhesion: 55oz
Carrier: Dead-Soft Aluminum Foil
Thickness: 5Mil
Environment: Indoor/Outdoor
Service Temp: -30 F to 325 F

JH1245 – Lead Foil Tape & Disks -

JH1245 is a 5Mil pure lead foil coated with a compounded, synthetic rubber adhesive system.   JH1245 exhibits excellent adhesion to a wide variety of surfaces including metal, glass, films, foils, and papers.  Highly malleable and can conform to the most intricate patterns.   Ideal use for stop off masking during electroplating.

Adhesive: Acrylic
Adhesion: 55oz
Carrier: Dead-Soft Aluminum Foil
Thickness: 5Mil
Environment: Indoor/Outdoor
Service Temp: -30 F to 325 F

Solid Silicone Rubber

Solid Silicone Rubber is used to produce press pads, gaskets, cushions and dielectric barriers in a wide variety of applications. Product is supplied in square yard sheet and continuous roll form. Smooth, blemish-free surface. FDA approved. Available in 11 constructions: 30 - , 40 - , 50 - , 60 - , 70 - and 80 durometer, Flame-Retardent, Fiberglass Reinforced, Electrically Conductive - , Thermally Conductive, and Fluorosilicone (fuel/oil resistant). Custom order for pressure sensitive silicone or acrylic adhesive.

Silicone Sponge Rubber

Silicone Sponge Rubber is used to produce gaskets, thermal shields, vibration mounts, seals, press pads and cushions for a variety of applications. Product is supplied in square yard sheet and continuous roll form. Compressible and Flexible. Available in eight constructions: Soft - , Medium - & Firm density - , Flame Retardent - , Fabric Reinforced - , Electrically Conductive, Thermally Conductive - , and Fluorosilicone (Fuel/Oil resistant) - . Custom order pressure-sensitive silicone or acrylic adhesive.