 |
|||||
 |
|
 |
|||
 |
|||||
 |
|||||
 |
|||||
|
|||||
 |
|||||
|
|||||
 |
|||||
|
|||||
 |
|||||
|
|||||
 |
|||||
|
|||||
 |
|||||
Silicone Coated Fabric & Belting
The Silicone Coated Fabric Series is the most conformable, flexible, trackable, and wear resistant product line offered by Innotec of WI, Inc. This series is made from woven fiberglass substrates that have been coated on one or both sides with silicone rubber. These fabrics provide a higher friction surface with different release qualities than PTFE coated fabrics. In fact, some products that may adhere to PTFE coated fabrics may not adhere to silicone coated surfaces. Available in multiple colors and with multiple plies, (up to three), these fabrics are used in applications where a surface grip with excellent release is desired.
Silicone Coated Fabric Characteristics
Silicone Coated Belts are engineered to retain the distinctive properties of PTFE; however, by adding a glass fabric to the matrix, there is an added benefits of dimensional stability, excellent tensile strength and extremely low elongation (<1%). Silicone Coated Belts have received USDA approval for food processing and handling, and are FDA compliant (21 CFR177.1550). In addition, the Silicone Coated belts can operate in temperatures from -400°F (-240°C) under static conditions and -100°F (-73°C) under dynamic conditions up to 500°F (260°C).
Typical Applications
Packaging:
Food:
Aerospace, Communications & Military:
|
Other Applications:
|
Styles Available
Product |
Color |
Plies |
Friction |
Nominal |
Weight |
Tensile Warp* |
Tensile Fill* |
Full Widths |
07R |
Red |
1 |
N |
.007" |
0.51 |
125 |
140 |
38* |
10R |
Red |
1 |
N |
.010" |
0.62 |
125 |
140 |
38* |
15R |
Red |
1 |
N |
.015" |
0.87 |
250 |
200 |
38 |
18R |
Red |
1 |
N |
.018" |
1.05 |
525 |
375 |
38* |
20R |
Red |
1 |
Y |
.020" |
1.15 |
525 |
375 |
50 |
25R |
Red |
1 |
N |
.025" |
1.44 |
525 |
375 |
38*, 50 |
42R |
Red |
2 |
Y |
.042" |
2.05 |
525 |
375 |
40*, 50 |
62R |
Red |
3 |
Y |
.060" |
3.07 |
525 |
375 |
50 |
10W |
White |
1 |
N |
.010" |
0.62 |
125 |
140 |
38* |
15W |
White |
1 |
N |
.015" |
0.87 |
250 |
200 |
38 |
18W |
White |
1 |
N |
.018" |
1.05 |
525 |
375 |
38* |
20W |
White |
1 |
Y |
.020" |
1.15 |
525 |
375 |
50 |
25W |
White |
1 |
N |
.025" |
1.44 |
525 |
375 |
38*, 50 |
42W |
White |
2 |
Y |
.042" |
2.05 |
525 |
375 |
40*, 50* |
62W |
White |
3 |
Y |
.060" |
3.07 |
525 |
375 |
50* |
25B |
Black |
1 |
N |
.025" |
1.44 |
525 |
375 |
38*, 50* |
42B |
Black |
2 |
Y |
.042" |
2.05 |
525 |
375 |
50* |
25G |
Gray |
1 |
N |
.025" |
1.44 |
525 |
375 |
38*, 50* |
*Although material width is standard, additional lead-time may be required. Please note: Additional thicknesses, styles and widths available upon special request. Other colors are available in above styles. Consult factory.
Disclaimer: The above tensile values are from Table 6 of Specification D579 and actual tensile values will vary. Innotec of WI, Inc. tests tensile strength to ASTM D828 and actual tensile values will be provided upon request.
