Splicing Tapes

A thin, conformable polyester film, single coated with a silicone pressure sensitive adhesive. Primarily used to splice silicone release coated papers, films and other difficult to bond surfaces. Also used in paint and powder coat masking applications that requires heat and chemical resistance.

Adhesive: Silicone
Adhesion: 30oz/in
Carrier: Polyester
Thickness: 2.5mil
Service Temp: -60°F to 350°F

This tape offers high adhesion and extremely stable adhesive system give it excellent resistance to photo processing chemicals, acids, oils, solvents, aging, standing and water immersion. A superior performance leader card splicing tape. Used for splicing siliconized papers, films and non-woven materials in converting. This tape is one of the cleanest and strongest splicing tapes available on the market.

Adhesive: Silicone
Adhesion: 35oz/in
Carrier: Polyester
Thickness: 3.3mil
Service Temp: Withstands Temperatures up to 400˚F

This tape features a release-coated backside, which makes functional splices by allowing adhesive to release from the spliced area. Primarily used for splicing release-coated paper and film. Ideal for converting of roll label sock and substrates to be coated with pressure-sensitive adhesive. Self-wound rolls provide speedy application and no release liner scrap. High tack, quick stick, silicone pressure sensitive adhesive.

Adhesive: Silicone
Adhesion: 30oz/in
Carrier: Polyester
Thickness: 2.8mil
Service Temp: Withstands Temperatures up to 400˚F

A heavy-duty polyester film tape used in all non-silicone substrates splicing applications.

Adhesive: Acrylic
Adhesion: 65oz/in
Carrier: Polyester
Thickness: 3.5mil

This tape exhibits excellent adhesion and quick stick. Offers good conformability and high sheer strength. Primarily used in web splicing and splice identification applications. Exhibits outstanding bond strength to difficult surfaces: Untreated films, textiles, fabrics, coated papers and other low energy surfaces.

Adhesive: Water Based Acrylic
Adhesion: 22oz/in
Carrier: Polypropylene
Thickness: 2mil Service Temp: 23°F to 104°F

For color coding, splicing. Printable and heat shrinkable.

Adhesive: Solvent Natural Rubber
Adhesion: 18oz/in
Carrier: UPVC
Thickness: 2.4mil
Temperature Resistance: 158°F

Specifically designed to meet the demanding end use requirements of high-speed flying splices. The product is supplied with a 50# tan Kraft release liner.

Adhesive: Acrylic
Adhesion: 42oz/in
Thickness: 1.9mil

Hand-tearable supported acrylic adhesive is heat-resistant and sticks fast to coated & uncoated stock. High tack, High adhesion, high shear strength; excellent low and elevated temperature performance. Adheres well to both Kraft and coated papers. Superior moisture resistance in high humidity, as when paper stock is stored outdoors. High performance splicing on paper, plastics and other continuous web processes. Especially suitable in the manufacture of corrugated paper.

Adhesive: Acrylic
Adhesion: 83oz/in
Carrier: Polyester
Thickness: 3.75mils
Service Temp: -17°F to 300°F

Bright red version of 514 is easy to see, when locating and removing splices from the web. High performance red splicing tape used in the manufacture of paper, plastics, foils and other continuous web processes when a visual splice is critical.

Adhesive: Acrylic
Adhesion: 83oz/in
Carrier: Polyester
Thickness: 3.75mils
Service Temp: -17°F to 300°F

Exceptional for splicing low-density materials. Resists high temperatures and UV light

Adhesive: Acrylic
Adhesion: 210oz/in
Carrier: Polyester
Thickness: 8.5mil
Service Temp: -64°F to 350°F

An ultra high peel polyester splicing tape, primarily used when splicing rough, smooth and difficult materials. Ideal for splicing heavy weight papers.

Adhesive: Acrylic
Adhesion: 179oz/in
Carrier: Polyester
Thickness: 6.0mil
Service Temp: -40°F to 200°F

JH645 Silver Mylar tape is a thin, reflective film coated with a dimensionally stable, long-term acrylic adhesive. Metallic backing is easily detected for automated splice removal. Join hard-to-stick paper, electronic components or other roll-fed items in assembly line or web printing applications.

3M630 is a metallized Mylar tape with a high-tack rubber adhesive for use in a variety of splicing applications. Metallic backing is easily detected for automated splice removal. Join hard-to-stick paper, electronic components or other roll-fed items in assembly line or web printing applications.

3M9993 Repulpable/Splittable Flying Splice Tape -

3M9993 is a double coated, repulpable splicing tape with a low release split liner.  Splittable tape laminate that provides both tabbing & splicing tape for newspaper, retro gravure and non-heat set printing applications.  Water solubility and alkali dispersability are excellent and eliminate danger of contaminating the paper mill broke with non-repulpable materials.  No need for complex patterns and multiple tapes.  Enables smooth splice transition and no need to angle splice.  Allows for smoother splice process through the printing operation.  No need to dump splices. 

*Flying splice tape for most grades of paper under 150gsm (80#) in manual and automatic splicing equipment.

*For optimum results, firm, even rub down pressure must be applied to the tape area to create the best possible adhesion between the tape and paper surface.  Application temperature range is: 70F to 100F.  Application below 40F not recommended-adhesive may becomes too firm to adhere properly. 

Carrier: Repulpable Paper
Adhesive: Repulpable Adhesives
Liner: Easy release coated repulpable paper
Splicing Side: Blue Tabbing Side
Color: Clear
Thickness: 8.3mil Bond
Strength: Excellent affinity to cellulose fibers
Repulpability: Completely*
Service Temperature: up to 400F

*Repulpability judged according to TAPPI UM-213, Procedure A.  It is important to follow the weight and quantity measurements for the fiber, splicing tape and water.  Non-representative results can occur if test guidelines are not followed.