Vinyl Tapes

P32 is a 6mil soft PVC with a synthetic rubber resin adhesive. The P32 provides a very effective vapor and moisture barrier. Highly Conformable and resistant to sun, water, fungus, bacteria, oil, acids, alkalies and corrosive chemicals. Good abrasion, impact and rupture resistance. Applications include: Color Coding, Aisle Marking, Harness & pipe wrapping: Duct & Joint Sealing: Masking for hard chrome plating & anodizing.

Adhesive: Synthetic Rubber Resin
Adhesion: 22oz
Carrier: PVC
Thickness: 6mil
Elongation: 160%
Service Temp: -20 F to 176 F
Colors Available: Yellow, White, Black, Clear, Red, Orange, Dark Blue, Light Blue, Gray, Purple, Dark Brown, Light Brown, Dark Green, Light Green

Available in Die Cut Disks: P32D

3M470 - Vinyl Tape -

3M470 is a conformable and abrasion resistant vinyl tape with excellent resistance to most chemicals used in typical electroplating processes. 3M470 can be qualified to meet the government spec. HH-T-0025 (GSA-FSS). Prolonged exposure to elevated temperatures (above 170°F) and hot caustics may cause weakening of the adhesive bond. 3M470 resists most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons, and esters, found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. Applications include: Color Coding, Aisle Marking, Harness & pipe wrapping: Duct & Joint Sealing: Masking for hard chrome plating & anodizing.

Adhesive: Rubber
Adhesion: 26oz
Carrier: PVC
Thickness: 6.3Mil
Elongation: 180%
Service Temp: 0F to 170F
Colors Available: Tan

JH757YE is a 7mil PVC film with a rubber adhesive. The JH757 offers resistance to most chemicals used in electroplating and printed circuit board applications. This conformable and abrasion resistant plastic film is vulnerable to ketones, chlorinated hydrocarbons and esters. Excellent U.V. resistance. Applications include electroplating, harness & pipe wrapping, and printed circuit board masking.

Adhesive: Rubber
Adhesion: 20oz
Carrier: PVC
Thickness: 7mil
Elongation: 200%
Service Temp: -20 F to 170 F
Colors Available: Yellow

JH799-Black & Yellow Non-Adhesive Vinyl Tape -

JH799-4mil non-adhesive plasticized PVC, non-adhesive film tape. Ideal for jobs that require high stretch, good “cling” characteristics, and great conformability for superior masking in hard chrome and other plating applications. High elongation and good strength permits trouble-free binding of wiring harnesses for the automotive industry.

Carrier: PVC
Thickness: 4mil
Service Temp: -20 F to 180 F
Colors Available: Black and Yellow

JH70 is 5Mil soft PVC with a synthetic rubber adhesive. The JH70 provides good abrasion, impact and rupture resistance. Highly conformable and resistant to oils, grease, solvents, and moisture. Applications include aisle marking, color coding, striping and warning for hazardous areas or exits to comply with OSHA requirements.

JH75 is a 7Mil soft PVC over-laminated with 2mil clear PVC, coated with a synthetic rubber adhesive.  Ideal for heavy usage or high traffic areas. Highly conformable and resistant to oils, grease, solvents and moisture.  Applications include aisle marking, color coding, striping & warning for hazardous areas or exits to comply with OSHA requirements.

JH778 is a 5mil Gold PVC Film with a rubber based adhesive system. Ideal for paint applications requiring high temperature resistance and conformability to painted or irregular surfaces. High Tensile strength provides crisp mask-off line in applications where thick coating layers are required. No paint flaking on removal.

Adhesive: Rubber
Adhesion: 30oz
Carrier: PVC
Thickness: 5mil
Color: Gold
Service Temp: 60 F to 320 F

JH768 is a 6mil Blue PVC Film with an aggressive rubber based adhesive system. Highly conformable fineline masking designed for color separation. Provides a smooth, sharp mask-off edge. Solvent and Heat resistant. Available with a release liner for masking jobs requiring special die-cut shapes.

Adhesive: Rubber
Adhesion: 35oz.
Carrier: PVC
Thickness: 6mil
Color: Gloss, Blue
Service Temp: 50 F to 280 F

JH765 is a 5mil Polypropylene Film with a green pigmented polyurethane adhesive system. Designed primarily for automotive and automotive aftermarket fineline masking. Performs well at high and low temperatures. This embossed polypropylene film offers conformability, solvent & water resistance. JH765 is ideal for aircraft and automotive, autobody painting applications that require stain and adhesive free removal. Comparable to 3M218.

Adhesive: Polyurethane
Adhesion: 30oz
Thickness: 5mil
Carrier: Polypropylene
Color: Green
ServiceTemp: -40 F to 280 F

JH7 is a black electrical insulation tape used for wire and cable insulation, bundling, primary splice insulation at no more than 600V. Non-Flame retardant. UL Approved.

Adhesive/Adhesion/Carrier: Synthetic Rubber / 16.4 oz. / PVC
Thickness/Color: 7mil / Black

JH6 is used for cable coding, quick identification of electrical phases, circuits, feeders and branches. Flame Retardant and Cold Resistant. UL Approved. Available in OSHA colors

Adhesive/Adhesion/Carrier: Rubber resin / 16.4 oz. / PVC
Thickness/Color: 7mil / Black, Yellow, Green, Orange, Purple, White, Red, Blue, Gray, Brown

JH5 is a premium grade all-weather electrician's tape, which is primary used for insulating wire splices, protecting conduits, appliance repair work, wire harnessing & industrial maintenance. Flame Retardant and All Weather Resistant. UL approved and CSA certified.

.Adhesive/Adhesion/Carrier: Synthetic Rubber / 48 oz. / PVC
Thickness/Color: 8mil / Black

Feet Per Roll: 66’